Manual

Commissioning handylab multi 12

ba75371e03 11/2009

Connecting the

plug-in power sup-

ply

You can either operate the measuring instrument with batteries or with the

plug-in power supply. The plug-in power supply supplies the measuring in-

strument with low voltage (12 VDC). This saves the batteries.

Warning

The line voltage at the operating site must lie within the input voltage range

of the original plug-in power supply (see section 1.6 T

ECHNICAL DATA).

Warning

Use original plug-in power supplies only (see

section 1.6 T

ECHNICAL DATA).

1 Plug the jack (1) into the socket (2) of the measuring instru-

ment.

2 Connect the original SI Analytics plug-in power supply (3) to an

easily accessible mains socket.