Instruction Manual

handylab Ox 12 Operation

ba75369e04 01/2011

Note

If you want to search for a certain element (e.g. date), proceed as follows:

Outputting stored

data to the

interface

Note

You can cancel the transmission with <M> or <RUN/ENTER>.

After the instrument number, the printout contains the complete storage con-

tents in ascending order of the storage location numbers.

1 Using <RUN/ENTER>, select the element (e.g. date).

2Press <▲> or <▼> repeatedly until the required date appears on the

display.

After approx. 2 s the temperature of the displayed measured value

appears.

1 Press the <RCL> key repeatedly until Sto SEr appears on the dis-

play.

2 Press the <RUN/ENTER> key.

The complete storage content is transmitted to the interface; during

the data transmission the numbers of the currently transmitted stor-

age locations run through. After the data transmission, the measuring

instrument automatically switches to the measuring mode.

Store

Auto

Ident

LoBat

Tref25

nLF

Sal

mg/l

ARng

Cal

Lin

Tref20

Sal

TDS

mbar

OUpH

mV/pH

AutoCal DIN

AutoCal TEC

Time

Baud

Day.Month No.

Year

RCL