User guide

handylab pH 12 Operation
35
ba75368e04 01/2011
Message StoFull This message appears when all of the 800 storage locations are occupied.
You have the following options:
3 Using <▲> <▼>, enter the required ID number
(1 ... 999).
4 Confirm with <RUN/ENTER>.
The instrument changes to the measuring mode.
No.
°C
2
4
TP
mV/pH
mol/L
8
Auto
TempError
RCL
LoBat
AutoCal DIN
CalError
ARng
AR
AutoCal TEC
ConCal
Time
Baud
Day.Month
Year
1
U
%
°F
S
mg/L
% ppm
ISE
2
29
9
6
pH
Store
Ident
Saving the current measured value.
The oldest measured value (storage
location 1) will be overwritten by this
Press
<RUN/ENTER>.
Returning to the measuring mode without
saving
press any key
Outputting the data storage see
section 4.4.3
Clearing the memory see
section 4.4.4