Owner manual

GPRS iCE
3
, V1.30 User Guide
18 iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: [phone] Fax: [phone] Email: [e-mail]
AT^ISDA System DO® Address
Description: Defines the iCE
3
System DO® protocol address that is applicable when being called directly
from HydroTel™ 2000 and when operating as a communication gateway device.
Default: 1
Notes: This parameter can range between 1 and 32767. It must be set correctly when the
scheduled connection mode is used in conjunction with a HydroTel™ base station as this
address is used to identify the incoming call when it is originated from a dynamic IP address.
Mode Command Responses
Read AT^ISDA? ^ISDA: 1
OK
Write AT^ISDA=1 OK OR ERROR
Help AT^ISDA=? ^ISDA: 1
OK
6.3.17 AT^ISNO Serial NO.
Description: Displays the iCE
3
serial number.
Default: N/A
Notes: This command is read only.
Mode Command Responses
Read AT^ISNO? ^ISNO: AE0-0001
OK
6.3.18 AT^IUID User ID
Description: Defines the User ID (user name) to use for connecting to the GPRS network.
Default: “”
Notes: This user id is sometimes required when connecting via an ISP, but usually left empty when
connecting via a private APN.
Mode Command Responses
Read AT^IUID? ^IUID: “userid”
OK
Write AT^IUID=”userid” OK OR ERROR
Help AT^IUID=? ^IUID: “userid”
OK
AT^IVER Displays Software VERsion
Description: Displays the iCE
3
software version.
Default: N/A
Notes: This command is read only.
Mode Command Responses
Read AT^IVER? iCE3 Version: 1.30
Copyright © 2008