User guide

Press the to enter the number of seconds.
The pump will run after pressure begins to drop
at pump run out or a suction switch activates.
8.
Error Reset Turning this control on will enable the AQUAVARII controller to retry its operation five
times when a fault condition occurs. Turning the control to “off” means that the AQUAVAR II
controller will shut down the first time a fault occurs. Select the mode you want by pushing the up
or down arrow key.
• Press to advance the display to:
Press to set the time between attempted
restarts or to disable this function
9. Clear error. The error memory can be deleted
by entering a password supplied by your
distributor.
Returning to normal operation:
10. Hold down the key for 2-3 seconds
until the display changes to:
11. Briefly touch the key to scroll until you
reach the display:
12. Press both at the same time until the display
changes to:
After a moment, the screen will automatically
return to the main menu start position.
36
Programming
SUBMENU ERRORS
Screen
*
*
▼
▼
SAVE ??? +
SAVE ??? SAVED
▼
▼
*
ERROR RESET
▼
▼
CLEAR ERRORS
0000
▼
“Fatal” errors will always shut down the system the first time.
Note
15 SEC
▼