User guide

79
Help Windows
Window text Help Text
Submenu Submenu: synchronous regulation; to enter
Synch. Control push select at least one second. See page 56.
Synchron Limit Frequency limit to enable the synchronous
35.0 Hz regulation. See page 56, step 11.
Synchron Window Frequency offset for the frequency limit which
5.0 Hz activates the synchronous regulation. See page 56.
Pump Sequence Diagnostics: Pump sequence and status. Identifies
Adr 1 Hold P1 address numbers and pump numbers in multi-
controller mode and synchronous mode.
BUSARBIT DIAG Diagnostics: Bus arbitration (this pump).
0 Diagnostics only, do not adjust.
SUBMENU Submenu: Serial Interface; to enter push “ “ key
RS485 Interface for at least two seconds.
Pump Address SIO address of the pump, for addressing each
Off AV II in multicontroller mode.
ADC Reference Pressure or frequency reference enabled by local
Local (Default) ADC or by SIO.
Frequency Lifting Frequency limit for pressure lift.
30.0 Hz
Lift Intensity Max. lift in % of pressure set point at max.
0.0% frequency.
Analog Out Meter output: frequency; pressure.
Actual Value
Dimension Unit Displayed dimension unit.
PSI
Test Run Time interval for test run 10 - 100 hr. or
After 24 h deactivated (inc+ dec).
Submenu Submenu pump test manual; to enter push
Test Run Man. select at least one second.
*