User guide

Data storage pH 7310

46 ba75929e03 12/2011

8 Data storage

You can transmit measured values (datasets) to the data storage:

 Manual storage (see section 8.1 M

ANUAL STORAGE, page 46)

 Automatic storage at intervals (see section 8.2 A

UTOMATIC STORAGE AT

INTERVALS, page 47)

Each storage process transmits the current dataset to the interface at the same

time.

8.1 Manual storage

You can transmit a measurement dataset to the data storage as follows. The

dataset is at the same time output to the interface:

If the storage is full The following window appears if all 500 storage locations are occupied:

1. Press the <STO> key shortly.

The menu for manual storage appears.

2. If necessary, change and confirm the ID number (1 ... 10000) with

<><> and <ENTER>.

The dataset is stored. The meter switches to the measured value dis-

play.

01.07.2011 11:24:16

pH 7.000 24.8 °C AR +++

ID number: 1

Continue

Manual data storage 4 From 500

01.07.2011

08:00

Back

Data storage full. Erase?

Yes

Warning

01.07.2011

08:00

Back