User guide

Data storage pH 7310
48 ba75929e03 12/2011
Settings You can configure the automatic storage function with the following settings:
Starting the auto-
matic storage func-
tion
To start the automatic storage function, select Continue with <><> and
confirm with <ENTER>. The meter switches to the measured value display.
The active automatic storage function can be recognized by the progress bar
in the function display. The progress bar indicates the remaining storage dura
-
tion.
Energy saving mode
([Eco mode])
If the automatic storing function is active, the meter provides an energy saving
mode ([Eco mode]) to avoid unnecessary energy consumption. The energy
saving mode switches off functions of the meter that are not required for the
Menu item Possible set-
ting
Description
ID number 1 ... 10000 ID number for the dataset series.
Interval 1 s, 5 s, 10 s,
30
s, 1 min,
5
min,
10
min,
15
min,
30
min,
60
min
Storage interval.
The lower limit of the storage
interval can be restricted by the
number of free storage locations.
The upper limit is restricted by the
storage duration.
Duration 1 min ... x min Storage duration.
Specifies after which time the
automatic storage should be ter
-
minated.
The lower limit of the storage
duration is restricted by the stor
-
age interval.
The upper limit is restricted by the
number of free storage locations.
1 Remaining storage duration
2 Graphical display of the storage duration
If the automatic storage function is activated, only the following
keys are active: Softkeys, <M>, <STO_> and <On/Off>. The other
keys and the automatic switch-off function are deactivated.
1
2
pH
6.949
25.0 °C
0d03h00min
01.07.2011
08:00
0
14
USB outputEco mode