User Manual

Operation Lab 960
22
ba75557e05 11/2009
4.3.1 Measuring the conductivity
4.3.2 Measuring the resistivity
1 Perform the preparatory activities according to page 21.
2 Immerse the conductivity measuring cell in the test sample.
3 If necessary, scroll with <MODE> until the measured
parameter
ӕ with the unit mS/cm or µS/cm is displayed.
4 Wait for a stable measured value.
5 Measurement with stability control (see page 25).
1 Perform the preparatory activities according to page 21.
2 Immerse the conductivity measuring cell in the test sample.
3 If necessary, scroll with <MODE> until the measured
parameter
ӕ with the unit MOhm is displayed.
4 Wait for a stable measured value.
0
5
2
0
3
5
C
°
S/cm
µ
nLF
TP
Tref25