User Manual

Operation Lab 960
30
ba75557e05 11/2009
4.4.3 Setting the cell constant manually
Note
The cell constant to be set must either be taken from the operating
manual of the measuring cell or is printed on the measuring cell.
Range
0.250 ... 2.500 cm
-1
1 Press <CAL> repeatedly until CELL is displayed.
2 Confirm the selection with <OK> or <CAL_> .
The cell constant that was set last is displayed.
3Press <CAL> repeatedly until a cell constant in the range 0.250
... 2.500 cm
-1
is displayed.
4 Set the cell constant to be used with <▲><▼>, e.g.
0.614 cm
-1
.
L
CL
E