Owner manual

Lab 970 Operation
35
ba75558e03 11/2009
Selecting the nonlinear
temperature
compensation
1 Press <CAL> repeatedly until tc is displayed.
2 Confirm the selection with <OK> or <CAL_> .
The temperature compensation that was set last is displayed.
3 Press <CAL> repeatedly until nLF is displayed.
4 Confirm the selection with <OK> .
The nonlinear temperature compensation is switched on.
The meter switches to the measured value display.
The selected temperature compensation appears as the status
display.
c
T
F
L
N
4
8
6
S/cm
µ
Tref25
ARng
nLF