Owner manual

Lab 970 Operation
37
ba75558e03 11/2009
Switching off the
temperature
compensation
5 Confirm the selection with <OK> .
The linear temperature compensation is switched on.
The meter switches to the measured value display.
The selected temperature compensation appears as the status
display.
1 Press <CAL> repeatedly until tc is displayed.
2 Confirm the selection with <OK> or <CAL_> .
3 Press <CAL> repeatedly until the following display appears.
4 Confirm the selection with <OK> .
The temperature compensation is switched off.
The meter switches to the measured value display.
c
T