Owner manual

Operation Lab 970

ba75558e03 11/2009

4.6 Downloading calibration data

You can download calibration data:

z to the display

z to the interface (see page 40)

While the calibration data is being displayed you can:

Download to display via

calibration menu

While the calibration data is being displayed you can:

4.7 Transmitting data

The meter has two interfaces:

z RS232 interface (serial port)

z USB interface (device)

Via both interfaces, you can transmit data to a PC and update the meter

software.

z press <OK> to display further calibration data

(calibrated cell constant)

1 Press <CAL_> to display the calibration data.

The calibration date and calibrated cell constant are displayed

consecutively for approx. 10 seconds each.

z press <OK> to display further calibration data

(calibrated cell constant)

z press <CAL

_> to download the calibration data to the

interface