Instruction Manual

4.0 Specifications

Max. Working Pressure:

PVC lens, 130 psig (9 bar) @ 70 F (21 C)

PVDF lens, 150 psig (10 bar) @ 70 F (21 C)

Max. Fluid Temperature:

PVC lens, F/NPT connectors 130 F (54 C) @ 0 PSI

PVDF lens, tubing connectors 200 F (93 C) @ 0 PSI

Full scale accuracy +/- 6%

Input Power requirement: 9 - 28 VDC

Sensor only output cable: 3-wire shielded cable, 6ft

Pulse output signal: Digital square wave (2-wire) 25ft max.

Voltage high = 5Vdc,

Voltage low < .25Vdc

50% duty cycle

Output frequency range: 4 to 500Hz

Alarm output signal: Open collector. Active low above

programmable rate set point.

30Vdc maximum, 50mA max load.

Active low < .25Vdc

Enclosure: NEMA type 4X, (IP56)

Approximate shipping wt: 1 lb. (.45 kg)

MICRO-FLOPage 4

Maximum Temperature vs. Pressure

0 30(2) 60(4) 90(6) 120(8) 150(10)

STATIC PRESSURE PSI (BAR)

70 F (21 C)

96 F (36 C)

122 F (50 C)

148 F (64 C)

200 F (93 C)

TEMPERATURE

174 F (79 C)

Models with

PVDF Lens and connectors

Models with

PVC Lens or connectors

4.1 Temperature and Pressure limits