User Manual

Multi 3500i Operation

4.8.1 Manual data storage

Proceed as follows to transmit to the data data storage and simulta-

neously output to the interface a measurement dataset:

If the data storage is full The following window appears if all 504 storage locations are occupied:

You have the following options:

z To erase the entire data storage, confirm Yes.

z To cancel the data storage process and switch to the measured val-

ue display, confirm No. Then you can, e.g. transmit the stored data

to a PC (see section 4.8.3) and subsequently erase the data storage

(see section 4.8.4).

1 Press the <STO> key shortly.

The menu for manual data storage appears.

2 If necessary, change and confirm the ID number (1 ... 999) with

<▲><▼> and <MENU/ENTER>.

The dataset is stored. The instrument switches to the mea-

sured value display.

- 30.10.2003 11:24:16

- pH 7.000 24.8 °CAR

- Oxi 7.27 mg/l 25.0 °CAR

- TDS 689 mg/l 25.0 °CAR

Store with ID no.:1

Continue

<STO> 1 of 504

Data storage full. Erase?

Yes

Warning