User Manual

Multi 3500i Operation
77
interface (displayed measured values, measuring datasets, calibration
records).
4.9.2 Connecting a PC/external printer
Use the AK340/B (PC) or AK325/S (ext. printer) cable to connect the
interface to the devices.
Caution
The RS232 interface is not galvanically isolated.
When connecting an earthed PC/printer, measurements cannot be
performed in earthed media as incorrect values would result.
Set up the following transmission data on the PC/printer:
Socket assignment
4.9.3 Operation with MultiLab pilot
With the aid of the MultiLab pilot software, you can record and evaluate
measuring data with a PC. The data is transmitted after the measuring
instrument is connected to the RS232 serial interface (COM interface)
of a PC.
Note
More detailed information can be found in the MultiLab pilot operating
manual.
Baud rate selectable between:
1200, 2400, 4800, 9600, 19200
Handshake RTS/CTS
PC only:
Parity none
Data bits 8
Stop bits 2
1
CTS
2 RxD
3 Ground
4TxD
1
2
3
4
RS 232
REC