User Manual

Multi 3500i Operation
79
Cond The following settings for conductivity measurements are reset to the
default settings with the Reset function:
The sensor settings are reset under the Reset menu item in the respec-
tive measuring menu. To open the settings, activate the relevant mea-
suring window in the measured value display and press the
<MENU/ENTER> key shortly
.
4.10.2 Resetting the system settings
The following system settings can be reset to the delivery status:
The system settings are reset under the System / Reset menu item in
the system menu. To open the system menu in the measured value dis-
play, press the <MENU/ENTER> key for approx. 1 s
.
Setting Default settings
Cal. interval 150 d
Measured variable
Cell constant (c) 0.475 cm
-1
(calibrated)
0.475 cm
-1
(set up)
Temperature compensation nLF
Reference temperature 25 °C
Temperature coefficient (TC) of
the linear temperature compen-
sation
2.000 %/K
TDS factor 1.00
Setting Default settings
Language English
Temperature unit °C
Beep On
Baud rate 4800 Baud
Output format ASCII
Contrast 48 %
Illumination On
Switchoff time 30 min