User Owner manual

OPERATION MULTILAB USER
4 ba75920d01 03/2011
2.2 Installing the MultiLab User program on the PC
The MultiLab User program is on the CD-Rom included in the scope of delivery
of your meter or is available on the Internet under www.wtw.de.
1. Unpack the installation program, Install_MultiLabUser_Vx-xx.zip and start
the executable file.
2. Follow the user guide.
The program is installed.
2.3 Connecting the meter with the PC
A USB cable is required for this connection (type A - type B).
The
MultiLab User program recognizes the suitable meters.
1. Connect the meter to the PC with a USB cable.
2. Switch on the meter.
3Operation
3.1 Activating the user administration on the meter
1. Connect the meter to the PC.
2. Switch on the meter.
The meter displays the start window. A measured value is displayed if a
sensor is connected.
3. Start the
MultiLab User program from the start menu.
The
MultiLab User window appears.
NOTE:
You can read out the firmware version of your meter (see operating
manual of your meter).
The current firmware version for your meter is available on the
Internet under www.wtw.de.
The instructions for the firmware update are available in the oper-
ating manual of your meter.
The current operating manual for your meter is available on the
Internet under www.wtw.de.