Owner manual

Operation pH 3210
24
ba75793e02 12/2008
4.3 Sensor-independent settings
The Storage & config menu comprises the following settings:
z System (see section 4.3.1).
z Data storage (see section 4.3.1)
4.3.1 System
Overview The following sensor-independent meter characteristics can be
adjusted in the Storage & config/System menu:
z Menu language
z Illumination
z Display contrast
z Interval of the automatic switch-off
z Clock and date function
z Reset of all sensor-independent system settings to the default
condition
Settings To open the Storage & config menu, press the <F1
_>/[Menu] or
<ENTER>key in the measured value display. After completing the
settings, switch to the measured value display with <M>.
Menu item Setting Description
System / General /
Language
Deutsch
English
(further)
Select the menu language
System / General /
Illumination
Auto
On
Off
Switching the display
illumination on/off
System / General /
Contrast
0 ... 100 % Changing the display
contrast
System / General /
Switchoff time
10 min ... 24 h Adjust the switch-off time
System /Clock Time
Date
Date format
Settings of time and date.
For details, see section
4.2.4
System /Service
information
Hardware version and
software version of the
meter are displayed.