User Manual

pHotoFlex / pHotoFlex Turb Lists
103
ba75491d04 07/2006
Program In the pHotoFlex (Turb), methods with the relevant method data are
stored as programs.
Programs are called up via the assigned program number.
Reset Restoring the original condition of all settings of a measuring system.
Resolution Smallest difference between two measured values that can be dis-
played by a meter.
Slope The slope of a linear calibration function.
Standard solution The standard solution is a solution where the measured value is
known by definition. It is used to calibrate a measuring system.
Temperature function Name of a mathematical function expressing the temperature behav-
ior of a test sample, a sensor or part of a sensor.
Test sample Designation of the test sample ready to be measured. Normally, a test
sample is made by processing the original sample. The test sample
and original sample are identical if the test sample was not processed.
Test set (test) A test set contains all reagents that are required for the photometric
determination of the sample according to the analysis specification.
Zero adjustment Adjusting a photometer with a water-filled cell.
The zero adjustment applies to measuring all measured parameters
(concentration, absorbance, transmission) of a photometer.