User Manual

Safety pHotoFlex / pHotoFlex Turb

ba75491d04 07/2006

2.1 Authorized use

This meter is authorized exclusively for carrying out the following mea-

surements in the field and laboratory:

! Analysis of substances in water and aqueous solutions

using round cells

! Concentration measurement

! Absorbance and transmission measurement

! Measurement of pH value and ORP

! Turbidity measurement (pHotoFlex Turb only).

The technical specifications as given in chapter 7 T

ECHNICAL DATA must

be observed. Only the operation and running of the meter according to

the instructions given in this operating manual is authorized. Any other

use is considered to be unauthorized.

2.2 General safety instructions

This instrument is built and inspected according to the relevant guide-

lines and norms for electronic measuring instruments (see chapter

ECHNICAL DATA).

It left the factory in a safe and secure technical condition.

Opening the photometer or adjustment, maintenance and repair work

must only be performed by specialist personnel authorized by the man-

ufacturer.

The only exceptions to this are the activities described in chapter

AINTENANCE, CLEANING, DISPOSAL. Non-compliance results in the

loss of warranty claims.

Follow the points listed below when operating the photometer:

! Follow the local safety and accident prevention regulations

! Observe the enclosed instructions of reagents and accessories

! Observe the regulations when dealing with dangerous substances

! Follow the operating instructions at the workplace

! Use only original spare parts.

Function and operating

safety

The smooth functioning and operational safety of the meter can only be

guaranteed if the generally applicable safety measures and the specific

safety instructions in this operating manual are followed during opera-

tion.