User Manual

pHotoFlex / pHotoFlex Turb Operation
77
ba75491d04 07/2006
4.10.2 Resetting the photometer settings
With the Photometry / Reset function, all photometer settings are reset.
4.10.3 Resetting the pH settings
Note
The calibration data are reset to the default settings together with the
measuring parameters. Recalibrate after performing a reset.
The following settings for pH measurements are reset to the default
settings with the Reset function:
Setting Default settings
PROG 0
Cell size 16 mm
Measured parameter Konzentration
Wavelength 436 nm
Blank values all erased
Setting Default settings
Cal. type TEC
Calibration interval 7 d
Measured parameter pH & ORP
Asymmetry (Asy)0 mV
Slope (Slp.) -59.16 mV/pH
Temperature, manual 25 °C
Temperature °C