Owner's manual
Table Of Contents
- 1 Overview
- 2 Safety instructions
- 3 Commissioning
- 4 Operation
- 4.1 Switching on or off the photometer
- 4.2 General operating principles
- 4.3 Photometer settings and system administration
- 4.4 Zero adjustment
- 4.5 Measuring in Concentration mode
- 4.5.1 Measuring cell tests with barcode
- 4.5.2 Measuring reagent tests with AutoSelector
- 4.5.3 Measuring reagent-free tests and user-defined methods
- 4.5.4 Exceeding the upper or lower limits of the measuring range
- 4.5.5 Selecting a method manually
- 4.5.6 Settings for Concentration mode
- 4.5.7 Measuring diluted samples
- 4.5.8 Sample blank value
- 4.5.9 Reagent blank value
- 4.5.10 Automatic Turbidity correction
- 4.5.11 Programming / modifying user-defined methods
- 4.5.12 The IQ LabLink procedure
- 4.6 Measuring the Absorbance / % Transmission
- 4.7 Multi wavelengths methods
- 4.8 Spectrum
- 4.9 Kinetics
- 4.10 Timer
- 4.11 Memory
- 4.11.1 Overview
- 4.11.2 Instructions on using USB memory devices
- 4.11.3 Measurement datasets
- 4.11.4 Saving measurement datasets manually
- 4.11.5 Saving measurement datasets automatically
- 4.11.6 Displaying measurement data memory
- 4.11.7 Filtering measurement datasets
- 4.11.8 Inverting filters
- 4.11.9 Erasing stored measurement datasets
- 4.12 Copying files
- 4.13 Transmitting data
- 4.14 Analytical quality assurance (AQA)
- 4.15 User management
- 4.16 Reset
- 4.17 Photometer information ([Info])
- 4.18 Lamp counter
- 4.19 Software and methods update
- 5 Maintenance and cleaning
- 6 What to do if ...
- 7 Technical data
- 8 Accessories and options
- Appendix
photoLab
®
6100 VIS Operation
111
ba75847e01 08/2009
4.11.9 Erasing stored measurement datasets
If you no longer need any stored measurement datasets, you can erase them
individually or altogether.
Erasure functions The following erasure functions are available.
The Measurement data memory
list is displayed.
The filter settings used last are
active.
<HOME>
Concentration,
Absorbance / % Transmission, or
Multi wavelengths
– [Setup]
– Measurement data
memory
Measurement data memory
04/16/07 9:52
27.03.07 14:00 3.50 mg/l Ni Administrator
AutoStore
27.03.07 14:05 3.64 mg/l Ni Administrator
AutoStore
27.03.07 14:10 3.69 mg/l Ni Administrator
AutoStore
27.03.07 14:15 3.72 mg/l Ni Administrator
AutoStore
27.03.07 14:20 3.72 mg/l Ni Administrator
AutoStore
27.03.07 14:25 3.75 mg/l Ni Administrator
AutoStore
27.03.07 14:30 3.73 mg/l Ni Administrator
AutoStore
27.03.07 14:35 3.80 mg/l Ni Administrator
AutoStore
27.03.07 14:40 3.78 mg/l Ni Administrator
AutoStore
Filter
Memory allocation: 9/1000
Setup Single value Delete
z Erasing an individual
measurement dataset
1 Highlight a measurement dataset.
2 Remove the highlighted
measurement dataset with
[Delete].
z Erasing all measurement datasets
of the displayed list
1 Open the setting menu with
[Setup].
2 Select and confirm Delete
memory (selected values only).
All measurement datasets
corresponding to the current filter
criteria are erased.
or
z Erasing all measurement datasets Select and confirm Delete
memory (all values).
All measurement datasets are
erased.