Owner's manual
Table Of Contents
- 1 Overview
- 2 Safety instructions
- 3 Commissioning
- 4 Operation
- 4.1 Switching on or off the photometer
- 4.2 General operating principles
- 4.3 Photometer settings and system administration
- 4.4 Zero adjustment
- 4.5 Measuring in Concentration mode
- 4.5.1 Measuring cell tests with barcode
- 4.5.2 Measuring reagent tests with AutoSelector
- 4.5.3 Measuring reagent-free tests and user-defined methods
- 4.5.4 Exceeding the upper or lower limits of the measuring range
- 4.5.5 Selecting a method manually
- 4.5.6 Settings for Concentration mode
- 4.5.7 Measuring diluted samples
- 4.5.8 Sample blank value
- 4.5.9 Reagent blank value
- 4.5.10 Automatic Turbidity correction
- 4.5.11 Programming / modifying user-defined methods
- 4.5.12 The IQ LabLink procedure
- 4.6 Measuring the Absorbance / % Transmission
- 4.7 Multi wavelengths methods
- 4.8 Spectrum
- 4.9 Kinetics
- 4.10 Timer
- 4.11 Memory
- 4.11.1 Overview
- 4.11.2 Instructions on using USB memory devices
- 4.11.3 Measurement datasets
- 4.11.4 Saving measurement datasets manually
- 4.11.5 Saving measurement datasets automatically
- 4.11.6 Displaying measurement data memory
- 4.11.7 Filtering measurement datasets
- 4.11.8 Inverting filters
- 4.11.9 Erasing stored measurement datasets
- 4.12 Copying files
- 4.13 Transmitting data
- 4.14 Analytical quality assurance (AQA)
- 4.15 User management
- 4.16 Reset
- 4.17 Photometer information ([Info])
- 4.18 Lamp counter
- 4.19 Software and methods update
- 5 Maintenance and cleaning
- 6 What to do if ...
- 7 Technical data
- 8 Accessories and options
- Appendix
Operation photoLab
®
6100 VIS
122
ba75847e01 08/2009
Activating AQA1 The AQA1 monitoring is activated in the Mode menu:
Defining the AQA1
Interval
The AQA1 Interval defines the interval between two AQA1 checks.
When an interval has expired, the following consequences become effective:
z Warning and loss of the AQA1 labeling
z Locking of the photometer against all measurements (if activated).
Select and confirm Weeks.
AQA1 is active.
The Interval setting indicates
Weeks as the interval unit.
<HOME>
[AQA]
– AQA1 setup
– Mode
AQA1 setup
04/16/07 9:52
Mode Weeks
Interval
Lock instrument
Configuration of tests ...
Mode
AQA1 inactive
Weeks
1 Enter a numeric value (2 to 52
weeks) (<0...9>) and confirm
The Interval defined for the AQA1
check is active.
<HOME>
[AQA]
– AQA1 setup
– Interval
AQA1 setup
04/16/07 9:52
Mode Weeks
Interval
Lock instrument
Configuration of tests ...
Interval
2 Weeks