Owner's manual
Table Of Contents
- 1 Overview
- 2 Safety instructions
- 3 Commissioning
- 4 Operation
- 4.1 Switching on or off the photometer
- 4.2 General operating principles
- 4.3 Photometer settings and system administration
- 4.4 Zero adjustment
- 4.5 Measuring in Concentration mode
- 4.5.1 Measuring cell tests with barcode
- 4.5.2 Measuring reagent tests with AutoSelector
- 4.5.3 Measuring reagent-free tests and user-defined methods
- 4.5.4 Exceeding the upper or lower limits of the measuring range
- 4.5.5 Selecting a method manually
- 4.5.6 Settings for Concentration mode
- 4.5.7 Measuring diluted samples
- 4.5.8 Sample blank value
- 4.5.9 Reagent blank value
- 4.5.10 Automatic Turbidity correction
- 4.5.11 Programming / modifying user-defined methods
- 4.5.12 The IQ LabLink procedure
- 4.6 Measuring the Absorbance / % Transmission
- 4.7 Multi wavelengths methods
- 4.8 Spectrum
- 4.9 Kinetics
- 4.10 Timer
- 4.11 Memory
- 4.11.1 Overview
- 4.11.2 Instructions on using USB memory devices
- 4.11.3 Measurement datasets
- 4.11.4 Saving measurement datasets manually
- 4.11.5 Saving measurement datasets automatically
- 4.11.6 Displaying measurement data memory
- 4.11.7 Filtering measurement datasets
- 4.11.8 Inverting filters
- 4.11.9 Erasing stored measurement datasets
- 4.12 Copying files
- 4.13 Transmitting data
- 4.14 Analytical quality assurance (AQA)
- 4.15 User management
- 4.16 Reset
- 4.17 Photometer information ([Info])
- 4.18 Lamp counter
- 4.19 Software and methods update
- 5 Maintenance and cleaning
- 6 What to do if ...
- 7 Technical data
- 8 Accessories and options
- Appendix
Operation photoLab
®
6100 VIS
136
ba75847e01 08/2009
4.15 User management
The functions of the user management are only available for users of the user
group, Administrator.
An administrator can
z activate or deactivate the user management for the meter
z create, change or delete individual user accounts.
4.15.1 User levels and user rights
The photoLab
®
6100 VIS allows the management of up to 100 users. Every
user is member of a user group with defined user rights.
User groups There are three hierarchical user groups:
z Administrator (top level)
z User (user account registered by the administrator)
z Guest (user without user account)
Administrators and users log in to the photometer with their user name and
password. Guests can optionally enter a name for their login. Thus,
documented measured values can later be assigned to the user.
User rights in detail
Action Adminis-
trator
User Guest
Select methods
Carry out measurements
Store measurement data
Check photometer (AQA1)
Check total system (AQA2)
AQA1 measured value labeling
AQA2 measured value labeling
Edit user-defined methods
Change AQA settings
Clear the memory
Set the date and time
Administrate users
Reset photometer settings
Carry out software update