Owner's manual

photoLab
®
6100 VIS Operation
137
ba75847e01 08/2009
Note
You can also switch off the user management and reactivate it as necessary.
To do so, you need administrator rights. If the user management is switched
off, the user name and password do not have to be entered. Each user has
full rights.
4.15.2 Activating or deactivating the User management function
Each user can activate the user management function.
If the function is deactivated, each user has administrator rights.
Only members of the user group, administrator can deactivate the user
management function.
If the function is active, each user has to log in to the photometer. After the
login, the user has certain rights depending on the user group.
Activating the user
management
function
1 Select and confirm Yes.
The user management function is
active.
When the user management
function is activated, a user
account for the administrator is
created. The user name is
"Administrator".
The preset password for this user
account is "admin".
Change this password as soon as
possible.
<HOME>
[General setup]
– User management
User management
04/16/07 9:52
User management not active
Activate user management?
Yes
No