Owner's manual
Table Of Contents
- 1 Overview
- 2 Safety instructions
- 3 Commissioning
- 4 Operation
- 4.1 Switching on or off the photometer
- 4.2 General operating principles
- 4.3 Photometer settings and system administration
- 4.4 Zero adjustment
- 4.5 Measuring in Concentration mode
- 4.5.1 Measuring cell tests with barcode
- 4.5.2 Measuring reagent tests with AutoSelector
- 4.5.3 Measuring reagent-free tests and user-defined methods
- 4.5.4 Exceeding the upper or lower limits of the measuring range
- 4.5.5 Selecting a method manually
- 4.5.6 Settings for Concentration mode
- 4.5.7 Measuring diluted samples
- 4.5.8 Sample blank value
- 4.5.9 Reagent blank value
- 4.5.10 Automatic Turbidity correction
- 4.5.11 Programming / modifying user-defined methods
- 4.5.12 The IQ LabLink procedure
- 4.6 Measuring the Absorbance / % Transmission
- 4.7 Multi wavelengths methods
- 4.8 Spectrum
- 4.9 Kinetics
- 4.10 Timer
- 4.11 Memory
- 4.11.1 Overview
- 4.11.2 Instructions on using USB memory devices
- 4.11.3 Measurement datasets
- 4.11.4 Saving measurement datasets manually
- 4.11.5 Saving measurement datasets automatically
- 4.11.6 Displaying measurement data memory
- 4.11.7 Filtering measurement datasets
- 4.11.8 Inverting filters
- 4.11.9 Erasing stored measurement datasets
- 4.12 Copying files
- 4.13 Transmitting data
- 4.14 Analytical quality assurance (AQA)
- 4.15 User management
- 4.16 Reset
- 4.17 Photometer information ([Info])
- 4.18 Lamp counter
- 4.19 Software and methods update
- 5 Maintenance and cleaning
- 6 What to do if ...
- 7 Technical data
- 8 Accessories and options
- Appendix

photoLab
®
6100 VIS Commissioning
21
ba75847e01 08/2009
3.3.2 PC/printer
PC and printer can be connected to the photometer as follows:
Note
Suitable are all printers that can interpret the PCL-3 printer control language.
Interface PC Printer Functions
RS232
The data is sent to the interface with
<PRINT>.
z If a printer is connected the data is
printed out.
z If a PC is connected, the data can be
received with a terminal program
(see section 4.13).
USB-A
The data is printed out with <PRINT>.
USB-B
-
Enables the direct connection of
photometer and PC. With this you can
transmit measurement data to the PC
(see section 4.12section 4.13) or update
the photometer software (see section
4.19.1).
The direct connection with the PC is
established with the aid of the
"SpectralTransfer" program. The
program is provided on the supplied CD-
ROM.
More instructions on how to establish
the connection are given in the
operating manual of the
"SpectralTransfer" program (see CD-
ROM).