Owner's manual
Table Of Contents
- 1 Overview
- 2 Safety instructions
- 3 Commissioning
- 4 Operation
- 4.1 Switching on or off the photometer
- 4.2 General operating principles
- 4.3 Photometer settings and system administration
- 4.4 Zero adjustment
- 4.5 Measuring in Concentration mode
- 4.5.1 Measuring cell tests with barcode
- 4.5.2 Measuring reagent tests with AutoSelector
- 4.5.3 Measuring reagent-free tests and user-defined methods
- 4.5.4 Exceeding the upper or lower limits of the measuring range
- 4.5.5 Selecting a method manually
- 4.5.6 Settings for Concentration mode
- 4.5.7 Measuring diluted samples
- 4.5.8 Sample blank value
- 4.5.9 Reagent blank value
- 4.5.10 Automatic Turbidity correction
- 4.5.11 Programming / modifying user-defined methods
- 4.5.12 The IQ LabLink procedure
- 4.6 Measuring the Absorbance / % Transmission
- 4.7 Multi wavelengths methods
- 4.8 Spectrum
- 4.9 Kinetics
- 4.10 Timer
- 4.11 Memory
- 4.11.1 Overview
- 4.11.2 Instructions on using USB memory devices
- 4.11.3 Measurement datasets
- 4.11.4 Saving measurement datasets manually
- 4.11.5 Saving measurement datasets automatically
- 4.11.6 Displaying measurement data memory
- 4.11.7 Filtering measurement datasets
- 4.11.8 Inverting filters
- 4.11.9 Erasing stored measurement datasets
- 4.12 Copying files
- 4.13 Transmitting data
- 4.14 Analytical quality assurance (AQA)
- 4.15 User management
- 4.16 Reset
- 4.17 Photometer information ([Info])
- 4.18 Lamp counter
- 4.19 Software and methods update
- 5 Maintenance and cleaning
- 6 What to do if ...
- 7 Technical data
- 8 Accessories and options
- Appendix
photoLab
®
6100 VIS Operation
47
ba75847e01 08/2009
4.5.5 Selecting a method manually
Selecting the
method last used
Selecting a method
from the Method list
Narrowing down the
method list
You can narrow down the method list and thus make the search easier:
z Using [Last used], you can restrict the method list to the ten methods last
used.
z With the search function you can search certain character strings in the
list. The search takes place as a full-text search of the entire list contents.
Thus you can search for a method number or certain citation form.
The method last used is
immediately selected.
<HOME>
Concentration
– [Last method]
The list of methods is displayed.
The methods are ordered
according to the method number.
The arrows
or
on the right
edge indicate that the list
comprises more methods further
up or down.
The method last selected is
highlighted.
Select the method:
1 Select the required method with
<▲><▼>. The active selection is
displayed in reverse video.
2 Accept the selection with
<START·ENTER>.
<HOME>
Concentration
– [Method list]
Select method (all)
04/16/07 9:52
Search:
1 C3/25 COD 10 - 150 mg/l
2 C4/25 COD 25 - 1500 mg/l
3A6/25 NH
4
-N 0.20 - 8.00 mg/l
4N2/25 NO
3
-N 0.5 - 25.0 mg/l
5N5/25 NO
2
-N 0.010 - 0.700 mg/l
6P6/25 PO
4
-P 0.05 - 5.00 mg/l
7P7/25 PO
4
-P 0.5 - 25.0 mg/l
160 09717 Pb 0.10 - 5.00 mg/l
67 14834 Cd 0.025 - 1.000 mg/l
39 14552 Cr 0.05 - 2.00 mg/l
▼
Last used