Manual

ProLab 1000 Operation
21
ba75576e04 01/2011
4.2.2 Navigation
Measured value display In the measured value display, you can
z open the relevant measuring menu with <MENU/OK>.
z open the system menu with the sensor-independent settings with
<MENU/OK
_>.
z change the display in the selected measuring window (e. g. pH <−>
mV) by pressing <MODE>.
Menus and dialogs The menus for settings and dialogs contain further submenus. The
selection is made with the <▲><▼> keys. The current selection is
displayed in a frame.
z Submenus
The name of the submenu is displayed at the upper edge of the
frame. Submenus are opened by confirming with <MENU/OK>.
Example:
z Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. The setting mode is opened with <MENU/OK>.
Subsequently, the setting can be changed with <▲><▼> and
<MENU/OK>.
Example:
General
Measurement
Interface
Clock function
Service information
Reset
System
Language: English
Beep
: On
Illumination: On
Contrast: 48 %
System