Manual

Operation ProLab 1000
70
ba75576e04 01/2011
4.7.6 Displaying and downloading calibration history
You can display and then output to the interface the calibration data.
Note
ID sensors have to be connected to the meter.
The calibration history of a sensor can be found
z under the Calibration / Calibration history menu item in the
respective measuring menu. To open it, activate the relevant
measuring window in the measured value display and press
<MENU/OK>.
z under the Data storage / Calibration history menu item in the system
menu.
In the measured value display, open the system menu with <MENU/
OK
_>.
Menu item Setting/
function
Description
Data storage /
Calibration history /
pH
ISE
- Display Displays the calibration history.
Further options:
z Scroll through the calibration
records with <▲><▼>.
z Quit the display with <ESC>
or <MENU/OK>.
z Switch directly to the
measured value display with
<MODE>.
- Output to
RS232/
USB
Outputs to the interface the
calibration history.