User guide

ProLab 1000 Maintenance, cleaning, disposal

ba75576e05 11/2013

5 Maintenance, cleaning, disposal

5.1 Maintenance

The only maintenance activity required is replacing the batteries.

Note

For maintenance of the electrodes refer to the relevant operating

manuals.

Replacing the batteries

1 Using a screw driver, unscrew the screws (2) of the lid of the

battery compartment.

2 Open the battery compartment (1) on the underside of the

meter.

3 Remove the four batteries from the battery compartment.

4 Place four new batteries (type Micro AAA) in the battery

compartment.

5 Close the battery compartment (1).

The date (day) flashes on the display.

6 Using a screw driver, tighten the screws (2) of the lid of the

battery compartment.

7 Set the date and time (see page 25)