Xylem RG700 4-20 mA Output Module User guide

Global Water
800-876-1172 • globalw.com
- 4 -
f. Connect the monitoring device to the module using terminal 7 as the
power source, terminal 4 as the signal wire, and terminal 8 as the
ground wire.
V. Using the 4-20 mA Output Module
c. There are two versions of the 4-20 mA Output Module. One is
designed to output 20mA when the pulse rate is 32 pulses/minute.
The other is designed to output 20mA when the pulse rate is 4095
pulses/min.
d. If the unit is switched on and off via terminal 6, the power must remain
on for 1 minute before the reading is valid.
VI. Specifications
Range: 4-20mA
Operating Temperature: 0° to +51°C
Size of unit: 3.25"x1.5”x2”
Weight: .5 lb.
VII. Maintenance
a. The unit should be cleaned periodically using a damp clean cloth. Do
not use Acetone.