Getting Started Guide Manual

When unpacking your Storm 3, make sure all the components ordered
are received and undamaged from shipping. The basic package includes
the following:
Storm 3 Main Unit
Sensor/Power/Communication Terminal Blocks
4 Four position blocks, 2 Three position blocks, 2 Two position blocks
USB Communication Cable
Standard USB-A connector to Mini-B connector, 6 feet
Wireless (Wi-Fi) USB Adaptor
Dust Caps For The RS-232 Port and USB Ports
3
What’s in the Box
Get to Know Your Storm 3
What’s in the Box
Hardware: Left Side
Hardware: Right Side
The WaterLOG® Storm 3 is a mid-range data logger with an ideal cost-to-performance
ratio. Built with communications in mind, the Storm 3 supports both internal and external
cellular modems and GOES satellite radios. Its balanced set of I/O includes four analog
inputs, four independently configurable digital I/O, SDI-12, RS-485 and RS-232 serial
connections. The Storm 3 requires no special software and is easily configurable through
either its direct USB connection or Wi-Fi interface supporting all standard web browsers
on PCs, tablets and smart phones. Other key features include library-based sensor setup,
built-in help menus, intuitive browser-based Graphical User Interface (GUI) and more.