User Manual

7
System 5000™ Software
From the main menu, press the “System Setup” button to open the setup menu. With the “General
Setup” tab selected and the “System Settings” option highlighted, press the “Open” button to enter
the “System Settings” screen.
Setting the Site ID
The ‘System Settings’ screen allows the
Site ID, Default Error String, and Switched
+12V settings to be modified. Restoring
the System 5000™ to its default settings
can also be performed here.
To set the Site ID, press the “Edit” button
next to the SiteID label.
The expanded Keyboard allows the Site
ID to be set via the touch screen. To erase
the current value (“SiteID”) press the CLR
button and then enter a new ID.
When nished, press the “OK” button, and
“OK” again on the System Settings page
to save the new Site ID. Press the “Exit”
button to back out to the main menu.