User guide

Operation Turb 430 IR/T
26
ba75507e03 07/2006
Note
In the case of wrong entries, you can cancel the procedure with <ESC>.
After canceling with <ESC>, it is possible to enter all digits once again.
The new digits are only taken over by confirming with <START/
ENTER>.
4.3.5 Menu overview
3 Select and confirm the Time menu with <▲><▼> and
<START/ENTER>.
A display for the entry of numerals with the number keys opens
up.
4 Enter the time using the number keys.
The digit to be changed is displayed underlined.
5 Confirm the setting with <START/ENTER>.
The time is set.
6 Set the current Date as necessary. The setting is made
similarly to that of the time.
7 Change the date format as necessary.
8 To make further settings, switch to the next higher menu level
with <ESC>.
or
Switch to the measured value display with <M> (short
pressure).
The instrument is in the measurement mode.
14:53:40
Time
Turbidity Calibration record
Calibration interval
Reset
Timer