User Manual

Cartridge Track:
When installing refill
cartridges, the track
guides the drop-in
cartridges into place.
Button:
Opens cartridge
compartment.
Carry Handle:
Grip this area to carry
your machine.
Cut Bar:
Holds finished materials
in place.
Cut Blade:
Slides to cut finished
material after it exits the
machine.
Handle:
Advances items through
the machine. Turn
clockwise.
Feed Tray:
Use with the alignment
guides printed on the tray
to feed items into the
machine.
5” Adapter:
Flips up to utilize Xyron
®
5” Creative Station
™
cartridges.
Getting to know your Xyron ezLaminator
®
Loading and Unloading 9” Cartridges
Loading and Unloading 5” Cartridges
Open cartridge compartment by pushing
button and lifting the lid.
Open cartridge compartment by pushing
button and lifting the lid.
Pull cartridge up and out of the machine.
Pull cartridge up and out of
the machine.
To replace, ensure the label on the refill
cartridge is facing you, drop the cartridge
into the machine using the track as a
guide.
To replace, flip up the 5” adapter in the
bottom center of the machine. Ensure the
label on the refill cartridge is facing you,
drop the cartridge into the machine using
the track as a guide.
Place material flap between the
2 black rollers.
Place material flap between the
2 black rollers.
Close the lid by pressing down until it
clicks.
Close the lid by pressing down until it
clicks.
* Your ezLaminator comes pre-loaded with a Two-Sided
Laminate Refill Cartridge.