User Manual

OPERATING INSTRUCTIONS

NOTE: In order to protect the pump during transportation, the pump in the

machine is tightened by the 4 screws under the bottom enclosure. Please unscrew the

4 screws when the machine is used at the first time. (See Fig. A).

Fig. A

1. Ensure that the working voltage matches your power supply before beginning use.

2. Check carefully for any damage during transportation.

3. This unit contains:

A: DIA100: Desoldering iron assembly with tip.

B: 307A: Soldering iron assembly with tip..

C: AC Power cord with plug.

D:Hot air gun

E:Accessories included:

a. Two cleaning brushes

b. One cooling strip

c. One 0.7∮ probe

d. 4pcs nozzles

e. Two iron holders

f. Hot air gun holder

Optional parts:

A) TWZ90: 32V/100W Tweezers can be interchangeable with soldering iron.

B) HAP80: 32V/80W Hot air blow pencil can be interchangeable with DIA100.