ENG da Vinci 1.
Product Overview Cartridge Slot Display Panel Remove the packaging supports Extruder Module LAN Port Z-Axis USB Port Front Door Print Bed Power Switch USB Flash Disk Slot Power Connector Remove the print bed fixing screws and printing module fixers Accessory Checklist Maintenance Tools ．USB Flash Drive ．Cartridge Locker USB Cable ．U ．Filament Cartridge ．Side Cover Plate x2 ．Glue Stick ．Power Cord USB Content: -Quick Guide -Important Notice -User Manual -XYZware Manual -Software -Tutorial Vid
Open the box Note: All packaging materials should be removed before powering up the printer. 1 Open the box and remove the accessories and the cushion. 2 Take out the printer by the grip holds. Tape x2 4 Open the top cover, and remove the cushions by the extruder 7 Remove the cushions by the print bed. 5 Remove the cardboard. 8 Remove the cardboard. 10 Insert the USB flash drive to install XYZware for printing. P3 all tapes.
Initial Settings After powering on the printer for the first time, complete the simple setup as instructed on the screen. Then select language and press Home Menu to proceed. Filament Network Status Load, unload filament and view the information about the filament. Display online status of Wi-Fi or Ethernet network. Browse the file for printing Print from the cloud gallery Print from USB flash drive*, "My Gallery" and sample folder.
Load Filament First install the cartridge to the cartridge slot… 1 Remove the filament stopper and tape. 2 Install the new filament cartridge into the empty slot. 3 Place and push to click the cartridge. 4 Select "Filament" > "Cartridge " > "Load". Guide Hole Cartridge Top cover 5 Insert filament into the guide hole until the printer starts to load filament. (When the loading begins, you will hear the sound of motor and can see the filament is pulled into the printer.
Sample Print 1 Select "Print" > "Sample " on the screen. 2 Select a sample to print, and tap to print. 3 Apply glue stick gently and evenly to the print bed base on the size of the printing object previewed on screen, and press on the screen. You may click to print. for "Printer info" during printing. 5 Remove the printed object when the print bed has descended.
Cloud Gallery 1 Once the printer is connected to the Internet, select "Gallery" to go to XYZprinting cloud gallery. 2 Browse the Gallery and switch among different categories; tap on the desired model for a zoomed-in preview. 3 Preview the image and information of the selected model, and tap to proceed. 4 Press to download, and wait for the download to complete. Caution: Before printing any model from any media, always remember to apply glue to the printing area on the printing bed.
Unload filament Please always complete the procedure for " Unload Filament " before changing a new cartridge. 1 Select "Filament" > "Cartridge" > "Unload" on the screen 2 F i l a m e n t i s u n l oa d e d f ro m extruder automatically. Gently pull filament out from the guide hole when prompted. 3 When filament is pulled out, press . 4 Remove cartridge locker and the catridge.
XYZware To transmit print object(s) via USB flash drive or PC to your da Vinci printer, please prepare the file with XYZware. When your PC is connected to the printer, you can send the object(s) to printer directly. XYZware virtualizes the printing platform on the screen. You may move, rotate and resize the object(s) in the software, and send the file for printing via USB flash drive or PC. Save .stl file Export to .3w format Import .stl,.
This print bed has been calibrated by our professional technician before shipment. Do not adjust the platform yourself unless necessary, or contact the customer service center. Print Bed Calibration 1.Check for firmware update In XYZware, select “About” > “Firmware Update”. 2.Activate Calibration Select "Setting">"Printer Settings"> "Maintenance" >"Calibrate Print Bed" and press to perform calibration. The printer starts automatic measurement. Wait for 2~3 minutes and verify the data shown.
5.Clean the detecting pin Select “Clean Nozzle” function, and brush the molten filament and dust from the detecting pin while the extruder is heated up. Clean the detecting pin with the copper brush Clean the 3 measurement points Activate " Setting" > "Printer Settings"> "Maintenance">"Clean Nozzle". 6.Level the print bed 1.The value indicates the height of point P1 P2 P3 ; greater value indicates the higher the detected point is. 2.
Support Details The troubleshooting instruction may guide you to fix the problem. If any error persists, please contact customer service center for support. Customer Support Center:http://support.xyzprinting.com Technical Support (US):supportus@xyzprinting.com Technical Support (EU):supporteu@xyzprinting.com Other Region:support@xyzprinting.com Service Code Symptom Action Service Code Symptom Action 0 0 0 3 problem Reboot the printer. 0 0 2 9 Cartridge 1 empty Replace cartridge 1 before printing.
