User's Manual

V1
P 2
Cartridge Slot
Display Panel
Extruder Module
Z-Axis
Front Door
Print Bed
USB Flash Disk Slot
Remove the print bed
fi xing screws and printing
module fi xers
Remove the
packaging supports
Product Overview
Accessory Checklist
USB Port
LAN Port
Power Switch
Power Connector
USB Content:
-Quick Guide
-Important Notice
-User Manual
-XYZware Manual
-Software
-Tutorial Video
-Print Sample
．
Side Cover Plate
x2
．
Cleaning Wire
．
Glue Stick
．
Filament Cartridge
．
Cartridge Locker
Maintenance Tools
．
Scraper
．
USB Cable
．
USB Flash Drive
．
Power Cord
U
Cl
ea
Important Safety Instruction
Do not place the printer in humid or dusty environment such as bathrooms and high traffi c areas. Do not place the
printer on a rickety surface and/or inclined position. Printer may fall down/or tumble and it may cause serious injury.
Do not touch the interior of the printer while printing. As it may be hot and include moving parts. Please keep the front
door closed during printing to avoid injury.
Important Safety Instruction for Use of Maintenance Tools
•
The maintenance tools provided should be only handled by an adult. Please keep the tools away from children.
Incorrect handling or maintenance of the printer may cause damage to the product or personal injury.
•
Be sure to maintain the printer while the print bed is cool.
•
The scraper is used to remove the object from the print bed when printing has fi nished and the print bed is cool.
•
Over time, carbon deposits or fi lament dust buildup in the nozzle may decrease its performance. It is advised to
clean the nozzle with the cleaning wire by activating "CLEAN NOZZLE" mode after every 25-hour of printing.
•
Molten fi lament may be left on the tip or surface of the extruder and inside the drive gear and may decrease the
performance of the printer, or lead to calibration result of “Error”. The copper brush is used to clean and remove the
fi lament pieces from the extruder in these cases.
．
Copper Brush