User's Manual

P 3

123

Open the box and remove

the accessories and the

cushion.

Take out the printer by

the grip holds.

Note: All packaging materials should be removed before powering up the printer.

Remove plastic bag and

all tapes.

Open the top cover, and

remove the cushions by

the extruder

Remove the tape on the

print bed.

Remove the cardboard.

Remove the cushions by

the print bed.

Remove the bottom

screw and plastic piece

under print bed.

Insert the USB flash drive to install XYZware

for printing.

Use the USB cable to connect the printer

to PC. Connect the power cord to the

printer then turn on the power switch.

4 6

Open the box

Packing support x2

Cable tie

Tape x2