User manual

P 9 HD23F1AS0C8
da Vinci 1.0 Pro 3in1
Viewpoints
Model information
The quality of a model is dened by
the number of facet. Generally more
facet could result in better quality
Delete model
Scanning view
I
I
J
J
K
K
L
L
M
M
Select a scan mode based on the shade of the
object to be scanned.
Press “Scan”.
Edit your scan (Optional).Press “Print” to activate XYZware
(Be sure to remove the object from the turntable before printing! )
~
Basic workow
1
2
3
4
Place the object to be scanned at the center of the turntable, and adjust the placement to make sure that as
much of the object is in the line of sight of the scanners.
For objects with high contrast/glossy/fuzzy/translucent/dark, especially black, dark green and dark blue,
surface, you may try to apply rubber coating (white coating works the best) on the surface. (The coating
can be peeled off easily when dry)
Due to the limitation of the laws of physics, objects with some features may not scan well. If scanning
with the correct scan mode setting doesn't help, follw the suggestion below may help to improve the
scanning quality
‧
Place the printer on a leveled and stable surface AND in a dark place without sunlight or other light sourcing
shining directly to the scanner modules for better scan performance.
‧
Scannable object size (diameter x height): 3x3cm to 15x15cm/1.18x1.18" to 5.9x5.9"
‧
Scannable object weight:
≦
3kg/6.6lbs
‧
Objects with the following features scan better:
◆
Stationary objects
◆
Non-translucent objects
◆
Cylinder-like objects, objects with round curves
◆
Objects with light-shaded surface, especially white surfaced objects
‧
Moving/living objects may not be scanned
‧
Objects with very  ne spikes, sharp or pointed tip or fur-covered objects may be dif cult to scan
A
B
I
M
●Suggested Conguration for Scanning
●Object Placement
●Tips for Improving Scanning Quality
Scanning result of a
translucent object
Apply rubber coating on
the translucent object
Scanning result of the rubber
spray-coated object