User Manual

P 10 V.1.1

da Vinci 1.0 Pro 3in1

●UTILITIES > CLEAN NOZZLE

Printer Maintenance

UTILITIES

BUILD SAMPLE

CHANGE NOZZLE

CLEAN NOZZLE

Regular cleaning of the print nozzle facilitates to not only extending service life of the

printer, but also improves print quality.

Enable "CLEAN NOZZLE" (nozzle cleaning) function. Clean the nozzle after the nozzle is

heated up, the bed has been lowered and the extruder has been moved to the front end,

and "READY FOR CLEAN" is displayed on screen.

Clean the detecting pin with Copper Brush

Filament residues produced during printing may

become attached to the nozzle and gear of print

module to inuence print quality, operation of the

printer, and measurement result of the bed. If such a

situation is encountered, please use a copper brush to

clean the print module by brushing off residue and dirt

on the detecting pin.

Clean Nozzle with Nozzle Cleaning Wire

With increased print frequency, the carbon

accumulation and dirt in the nozzle might affect print

quality. Thus, we recommend you to clean nozzle

for every 25 hours of print. Please clamp the nozzle

cleaning wire with needle-nosed pliers to insert it into

the opening of the nozzle carefully for cleaning.

(Filament should be unloaded from the extruder before

cleaning the feeding path.)

Wipe Measurement Points

After the bed is lowered, please switch off power to

cool the bed, followed by wiping 4 measurement points

with damp cloth.

Printer screen menu, functions and messages