User manual

P 17 V.1
da Vinci 1.0 Pro
The printer supports Wi-Fi connection printing.
Install XYZware for Pro, and activate Wi-Fi setting of the printer in accordance with the following instruction to switch the
printer to wireless control mode, such that the print file may be subsequently transferred wirelessly.
● Preparation Prior to Setting
● Wi-Fi Settings
WiFi Connection
Please use a USB cable to link the computer and the
printer, and open XYZware for Pro.
Click the "Printer Monitoring" function icon on the lower
right corner on the screen, open "Printer Monitoring"
window, click "My Printer" > "Scan" to enter the page
for printer search, and click "Wireless Network Settings"
to enter the page for wireless print settings.
1
2
2-2 2-3
2-4 2-5
2-1
◆
WEP
◆
WPA
◆
WPA2
1.
2.
3.
4.
5.
The network print function is provided mainly for Intranet application. Please set the printer and the computer in the same domain, that is, link them to
the same wireless base station (Access Point)
Before linking the printer, settings would be adjusted for the connected wireless base station. For detailed setting way, please refer to the operation
instruction of the product or original vendor relevant information.
Channel Width may be set to 20 MHz for use of wireless print function. Please refer to original vendor operating instruction of wireless base station to
understand adjustment way
Please keep the wireless network function in the on state
The machine supports the following link security modes. Public key information would be requested to enter in setting printer connection
Parameters Description