User manual

P 5 V.1
da Vinci 1.0 Pro
Maintenance and Service
If the printer is delivered for repair during warranty period, it is recommended to pack the machine
with original packing materials before transportation. Therefore, please keep original packing
materials. If other packing materials are used instead, the print-er may be damaged during print
process. In such situation, the XYZprinting the right to charge repair fee.
Notes and Description for Use of Maintenance Tools
•
The following tools can be used only in an environment with guidance or monitoring by adult. Do not allow
children to obtain maintenance tools in unfamiliar situations in order to avoid danger.
•
Please make sure to maintain the printer as the bed is cooled.
•
After print is finished and the print bed is cooled to room temperature, the printing object may be taken off with Scraper.
•
In order to prevent print quality from impact due to residual and accumulated filament, which results in poor
discharge, after long-term use of print nozzle, it is recommended to enable the "CLEAN NOZZLE" (nozzle cleaning)
function of the printer every 25 hours of print to clear residuals with nozzle cleaning wire.
•
Filament residuals produced during print may also attach onto nozzle and gear of print module to influence print
quality, printer operation, as well as measurement result of bed. For such situation, please use cooper brush to
clean the print module.
●
Display and Control Panel
Direction Up / Decrease the value
Back to pervious menu /
Adjust the value /Move to
the preview item
Go to the next menu / Adjust
the value /Move to the next
item
Select / Confirm setting /
Confirm and exit
Direction Down / Increase
the value
Home menu
OK
Pro. 1
UTILITIES
SETTINGS
INFO