User manual

P 9 V.1

da Vinci 1.0 Pro

● UTILITIES > CLEAN NOZZLE

Cleaning Way

UTILITIES

BUILD SAMPLE

CHANGE NOZZLE

CLEAN NOZZLE

Regular cleaning of the print nozzle facilitates to not only extending service life of the printer, but also improves print

quality.

Enable "CLEAN NOZZLE" (nozzle cleaning) function. Clean the nozzle after the nozzle is heated up, the bed has

been lowered and the extruder has been moved to the front end, and "READY FOR CLEAN" is displayed on screen.

Clean the detecting pin with Copper Brush

Filament residues produced during printing may become

attached to the nozzle and gear of print module

to influence print quality, operation of the printer, and

measurement result of the bed. If such a situation is

encountered, please use a copper brush to clean the

print module by brushing off residue and dirt on the

detecting pin .

Clean Nozzle with Nozzle Cleaning Wire

With increased print frequency, the carbon accumulation

and dirt in the nozzle might affect print quality.

Thus, we recommend you to clean nozzle for every 25

hours of print. Please clamp the nozzle cleaning wire

with needle-nosed pliers to insert it into the hone of

the nozzle carefully for cleaning.

Wipe Measurement Points

After the bed is lowered, please switch off power to

cool the bed, followed by wiping 3 measurement

points with damp cloth

Operation for Functions