EN da Vinci 1.0 Pro Laser Engraving Module User Manual Product safety Introducing the laser engraver module Introducing the installation / detachment of the laser engraving module Laser engraving operations and instructions Preferences and settings Stopping and canceling laser engraving Product Model: da Vinci 1.
da Vinci 1.0 Pro The purpose of this user manual is to help users understand the means of correctly operating the laser engraver module of the da Vinci 1.0 Pro. 3D printer. This manual provides relevant information on operational knowledge, application techniques, and maintenance of the laser engraver module. If you wish to learn more about the latest information of the da Vinci 1.0 Pro.
da Vinci 1.0 Pro Introducing the installation / detachment of the laser engraving module ● Replace the laser engraving module: Before replacing the extruder module with the laser engraving module, check if there are remaining filaments in the nozzle and remove them accordingly. UTILITIES CALIBRATE BUILD SAMPLE CHANGE NOZZLE 1 After removing the filament, please select [CHANGE NOZZLE].
da Vinci 1.0 Pro Laser engraving operations and instructions ● Reminders before laser engraving The engraving module is only capable of engraving planar objects. The target should thus be placed flatly on the panel. Avoid engraving warped or curved objects that are not completely flat. The user may use tape to secure and flatten the object on the platform or other flat surfaces. 1 Avoid using engraved materials that are curved or otherwise not flat.
da Vinci 1.0 Pro ● Laser engraving process Yes No 2 Select “Yes” to return the platform to its upper position. After the platform has reached its original location, lower it to a suitable position to place the item to be engraved upon the platform. 1 A warning screen should appear. Please ensure that the item has been removed from the platform (ensuring that the platform is clear of any item). Note: The engraving module is only capable of engraving planar objects.
da Vinci 1.0 Pro 6 Move the picture over the red circular dot to cover it. 7 The user may edit the picture such as by enlarging, shrinking, or rotating it. ：Click once to hide the imported file. Click on this icon again to show it. ：Delete the imported file. Once basic editing has been completed, select this "Engrave" icon. Alternatively, select this "Advanced Engraving Settings" icon to complete advanced settings before engraving. P6 V.
da Vinci 1.0 Pro 8 Select "Edit". The software screen shall display the laser engraver settings. ◆ The user may choose between Vector / Pixel engraving modes (default software setting is Vector mode). Vector:The original form and clarity will be retained. The graphic will be depicted in hollow lines. No jagged edges will appear. Raster: Pixel graphics may depict the original appearance and solid lines of the graphic and provides a more realistic finish.
da Vinci 1.0 Pro ※ A preview when Canny Edge Detector (sensitivity for contour detection) has been set to 80. Raster mode preview screen ※ A preview when White Color Range (sensitivity for color darkness) has been set to 0. P8 V.
da Vinci 1.0 Pro ※ A preview when White Color Range (sensitivity for color darkness) has been set to 80. ● Laser engraving parameters and ranges Numerical range Item Settings Contents Vector / Raster Engraving Speed Smaller values will lead to slower engraving speed 1~30 mm/s but more in-depth engraving effects. Vector / Raster Engraving Layer Set the number of engraving lines. Selecting more lines will lead to more in-depth engraving effects.
da Vinci 1.0 Pro Profile Settings ● Save settings: Once engraving speed and engraving layer parameters have been set, click on “Save” to save the settings. A file preference settings screen will appear. Enter the filename: Use only English alphabets and number (for example, the file can be named as 1). When complete, click on “Yes” to add this as a new set of preferences. You may use the pull-down menu in the Preferences interface to select the saved preferences.
da Vinci 1.0 Pro ● Removing the settings: To delete a set of saved preferences, click on the engraving Preferences, click on the pull down menu, find and select the specified file name, and click on “Delete”. Click on “Yes” to confirm the deletion of the selected settings combination. Yes No ● To restore default preferences and settings: 1 Click on “Add” to return to the default software settings and combinations. After setting or selecting the laser engraving parameters, click on “Apply”.
da Vinci 1.0 Pro Pause and cancel the laser sculpting ● PAUSE Pro. 1 PRINT MODE PAUSE CANCEL 1 Select “PAUSE” to pause the laser engraving process. JOB EILL BE CANCELLED IF PAUSED OVER 3 MINUTES 3 The screen will display “JOB WILL BE CANCELLED IF PAUSED OVER 3 MINUTES” (after about 5 seconds). PAUSE ARE YOU SURE? NO YES 2 Select [YES]. Pro. 1 PRINT MODE RESUME CANCEL 4 This screen will appear after about 5 seconds. Select “CANCEL” to cancel the task, or “RESUME” to continue. ● RESUME Pro.
