User manual

P 2 V.1
da Vinci 1.0
Pro
The purpose of this user manual is to help users understand the means of correctly operating the laser en-
graver module of the da Vinci 1.0 Pro. 3D printer. This manual provides relevant information on operational
knowledge, application techniques, and maintenance of the laser engraver module.
If you wish to learn more about the latest information of the da Vinci 1.0 Pro. 3D printer and the entire catalog
of products offered by XYZ, you are welcome to contact your local dealer or visit the offi cial website of XYZ-
printing: http://www.xyzprinting.com
Please read through this manual and all safety reminders carefully before using, operating, dismantling,
replacing, or removing this product. Please also comply with relevant safety reminders and instructions.
Note
：
Avoid using materials that are light colored, white, or have glossy surfaces for laser engraving.
Achieve the best engraving results with gray colored or dark colored materials.
◆
◆
◆
◆
◆
◆
◆
◆
Please prevent children from coming into contact with this product on their own or play with the engraver as this may cause injuries or electric shocks.
Do not move the machine when the power supply has been switched on.
Do not open the front door when the machine is running to prevent interrupting the laser engraving process, as this would impact the integrity of the sculpted image.
Do not look directly at the laser engraving process to prevent eye discomfort.
Mild odors may be generated during the engraving process. We recommend working in a well-ventilated and open area to ensure operational comfort.
Please turn off the electric power when dismantling / replacing the laser engraving module.
Ensure that there are personnel around the printer during laser engraving.
Defect reparation must be carried out according to the contents of this instruction manual. Where the defect cannot be repaired, please contact your printer dealer or the
customer service center.
Product Safety
Introduction to the Laser sculpting module
Important Safety Information
Product Overview
Specifi cations
●
●
●
Laser Wavelength 450nm+5nm/-10nm InGaN
Engraver
head
Heating bus slot
Fan
Laser Wavelength
350mW ~500mW
Laser Power for Class 3B
Classifi cation
Beam Diameter
≦
1mm
Engraving area 20 x 20 cm
File Types JPG / PNG / GIF / BMP
Mode of Operation CW (Continuous Wave)
Recommended laser engraving material:
◆
Paper
◆
Cardboard
◆
Leather
◆
Wood
◆
Plastic
●