User manual

P 4 V.1

da Vinci 1.0

Pro

The engraving module is only capable of engraving planar objects. The target should thus be placed ﬂ atly on

the panel. Avoid engraving warped or curved objects that are not completely ﬂ at.

The user may use tape to secure and ﬂ atten the object on the platform or other ﬂ at surfaces.

Connect the printer to the computer:

Please check that the printer is already con-

nected. After connecting, the “XYZware for

Pro” screen will appear. Select the Switch

to Laser Engraving function at the Tool area

at the top right hand corner of the software

interface.

Avoid using engraved materials that are

curved or otherwise not ﬂ at.

The user may use tape to secure

and ﬂ atten the

object on the platform or other

ﬂ at surfaces.

An example of an item placed

within the platform.

Laser engraving operations and instructions

Reminders before laser engraving

●

◆