User manual

P 5 V.1

da Vinci 1.0

Pro

Laser engraving process

●

A warning screen should appear. Please ensure that the item has been

removed from the platform (ensuring that the platform is clear of any item).

Select “Import” on the device to select the graphic ﬁ le you

wish to engrave.

Enter the platform display screen.

Once the picture ﬁ le has been imported, please

verify that the picture covers the center of the

screen as indicated by the red round dot.

(the red round dot on the screen will be the

center of the platform)

Note:

The engraving module is only capable of engraving planar objects. The target

should thus be placed ﬂ atly on the panel. Avoid engraving warped or curved ob-

jects that are not completely ﬂ at.

Select “Yes” to return the platform to its up-

per position. After the platform has reached

its original location, lower it to a suitable

position to place the item to be engraved

upon the platform.

Support file type：

Yes