User Manual

P 15 V.1.1
da Vinci 1.0 Pro
Temperature Customization:
● Use "left key", "right key" to select the digit (single, tens, hundreds) for the temperature to be adjusted.
● Use "up key", "down key" to adjust the value. The up key is for increasing value, and the down key is for decreasing value.
Press "OK" key to apply setting.
● If your customized temperature exceeds allowable setting range, press "OK" and a setting range alert will be displayed.
● If the temperature for print bed is specified as 40° C, room temperature printing will be enabled and the print bed will not be
heated.
● Excessively low extruder temperature may result in poor filament feeding, result in poor filament feeding that prevents proper
extrusion of the filament through the nozzle. Hence, please adjust the operating temperature of the extruder first.
● UTILITIES > CHANGE CART > UNLOAD FILAMENT
● SETTINGS > USER FILAMENT
Unloading Filament
Temperature Setting
UTILITIES
CHANGE CART
UNLOAD FILAMENT
SETTINGS
USER FILAMENT
USER FILAMENT
APPLY SETTING
------------------------
>NOZZLE: 210
℃
USER FILAMENT
NOZZLE: 210
℃
>BED: 040
℃
UNLOAD: 170 ℃
USER FILAMENT
NOZZLE: 210
℃
BED: 040
℃
>
UNLOAD: 170 ℃
In unloading filament, activating the filament unloading function on the control panel of the printer
1. Wait for the extruder to heat up to operating temperature and unload the filament.
2. As "PULLOUT FILAMENT" is displayed on the screen, press the release arm and pull out the filament.
The user may customize nozzle temperature, print bed temperature and filament unloading temperature in accordance with
requirements of different filaments and design objects:
Select the item for temperature setting
Press "OK" to enter temperature
setting for nozzle
Press "OK" to enter temperature
setting for print bed
Press "OK" to enter temperature
setting for filament unloading
1
2
3
A
Nozzle
B
Print Bed
C
Filament Unloading
Constraints of Customized Temperature Range
NOZZLE
BED
UNLOAD
Warming up of the nozzle of the extruder in feeding and
printing: 170℃ ~ 240℃
Temperature elevation range of the print bed: 0℃ ~90℃
Temperature elevation range of the extruder in unloading:
170℃ ~240℃
The temperature setting in this procedure is applicable only to 3D Builder application software
developed by Microsoft. For more information about 3D Builder, please visit the Microsoft website
Remarks:
Functional operations and descriptions